OWNER’S MANUAL V122022 ENGLISH
M-9690 RECUMBENT BIKE FENX
This manual can be downloaded on
www.salter.es
STEP 3 – Connection Wire Assembly
Refer to FIG.1, slide the Connection Wire (110) & First Pulse Sensor Wire (113) through the Upright Post (48).
NOTE: Be careful not to pinch the wires.
STEP 4 – Upright Post Assembly
a.
Refer to the drawing on the right, insert the Upright Post (48) into the Main Frame
(1) and make sure the upright post’s welded bolts go into the screw hole of the
front bracket located in front of the main frame. And slightly attach 2pcs Nylon Nuts
(M10xp1.5)(133). Note: please do not fully secure 2pcs Nylon Nuts
(M10xp1.5)(133) first for letting the Upright Post to assemble properly.
b. First fully secure with 2pcs Bolts (M10xp1.5x20mm)(168) at the front of the Upright
Post (48). Then go back to fully tighten with 2pcs Nylon Nuts (M10xp1.5)(133).
STEP 5 – Upright Post Sleeve Assembly
Attach the Left Upright Post Sleeve (55) and the Right Upright Post Sleeve (56) to the Upright Post (48) and secure
with 4pcs Bolts (M5xp0.8x15mm)(147).
STEP 6 – Upper Handlebar Assembly
Insert the Upper Handlebar (46) into the Upright
Post (48) and secure with 6pcs Hex Flange Bolts
(M8xp1.25x16mm)(167). NOTE: Be careful not to
pinch the wires.
