Salter FENX M-8395, Руководство пользователя

Страница: 35 / 36

USER’S MANUAL V072023 ENGLISH
M-8395 TREADMILL FENX
This manual can be downloaded on www.salter.es
Problem Possible Reason Trouble Shooting
Equipment
cannot Start
1
．
The plug hasn’t been connected or
the switch hasn’t been opened
2
．
The over current protector of the
treadmill disconnected
3
．
The indoor over current protector
disconnected
4
．
Safety key disconnected
1
．
Insert plug or start the power
2
．
Change fuse or press the protector
button
3
．
Reset over current protector
4
．
Put safety key to right place
Running Belt
Slippery
The belt hasn’t been tightened
Adjust the tightness of the belt (see
maintenance guide)
Belt not in the
Middle The degree of the roller balance hasn’t
been adjusted well Adjust the belt to the center
(see maintenance guide)
Abnormal
Sound
The screws loosen Fix relevant screws

If your treadmill has problem beyond above, please contact our customer service center at
sat@salter.es. Our after-sales service team will help you.

If there is any damaged part, please stop using the product immediately.

Only after replacement of damaged parts or proper fixing provided by professional engineer, the
product could be operated again.
9. ENVIRONMENTAL NOTE
The symbol with which is marked this unit (waste bin with wheels) indicates that it cannot be
thrown for any reason to the domestic waste. When disposing of the product should be taken
to a proper recycling point.
If properly dispose of the product may be reused and recycled, and it will help to conserve
natural resources, preserve the environment and significally reduce the potential negative
impact on our environment.
For more information about the return system, collection and recycling of these products contact your City
Council or the retailer.
10. WARRANTY CONDITIONS
Consult the warranty of this equipment on www.salter.es. It is essential to indicate the serial number of the
equipment for repairs under warranty.