Salter FENX M-8395, Руководство пользователя

Страница: 9 / 36

USER’S MANUAL V072023 ENGLISH
M-8395 TREADMILL FENX
This manual can be downloaded on www.salter.es
5.4 MOVING THE TREADMILL
The treadmill has wheels for transportation in a comfortable and safe way.
Before moving the treadmill you must make sure that:
1. Restore the incline to flat (0) position.
2. Unplug from power point. Put your hands on the end of the running deck. Hold up the treadmill. Move
the treadmill to suitable position by using the transport wheels. Put down the treadmill slowly with hands
holding on the running deck.
5.5 HOW TO USE YOUR GRIP PULSE HANDRAILS
This is a very simple operation to measure your heart rate while you are exercising.
Simply grasp both handrails firmly and hold. Your pulse reading will be displayed in the Pulse segment of the
Dashboard (top row, far right) in beats per minute. Remember, this is only a guideline and not exact, as your
movement and grip integrity can slightly alter the Dashboard reading from your actual rate. The pulse rate
you see will be a good approximation of your heart rate at that moment of your exercise.
5.6 HOW TO USE YOUR WIRELESS HEART RATE CHEST BAND (NOT INCLUDED. OPTIONAL)
Use the Wireless Chest Band to transmit your heart rate directly to the
Dashboard. As soon as the Transmitter senses activity from your heart,
it will be activated.
Step 1: Adjust the band to fit as tight as comfortable, around your chest,
just below your pectoral muscles. Adjust the band so that it is positioned
securely and will not fall or move during your workout.
Step 2: Position the Transmitter (the middle section of the band) with the
flat side against your body, and the logo and rounded, silver surface facing
outward away from your body (centered).
Step 3: Begin your workout and check for a pulse reading on the
Dashboard. The heart-Shaped Icon will flash when it is sensing your heart
pulse.
NOTE: Perspiration will help to conduct your heart rate pulses to the
Transmitter. If the Transmitter is not sending a signal, or it seems erratic,
consider adding some water to the back side of the Transmitter, or wait
for your own perspiration to help improve the signal.
It is always recommended to use your wireless chest band when using workout programs.