Salter FENX M-8395, Руководство пользователя

Страница: 3 / 36

USER’S MANUAL V072023 ENGLISH
M-8395 TREADMILL FENX
This manual can be downloaded on www.salter.es
2. SPECIAL SAFETY PRECAUTIONS
Power source:
1. Choose a place in reach of a socket when placing the treadmill.
2. Always connect the appliance to a socket with a grounded circuit and no other appliances connected to it.
It is recommended not to use any extension cords.
3. A faulty grounding of the appliance can cause the risk of electrical shocks. Ask a qualified electrician to
check the socket in case you do not know if the appliance is grounded appropriately. Do not modify the plug
provided with the appliance if it is not compatible with your socket. Ask a qualified electrician to install a
suitable socket.
4. Sudden voltage fluctuations can seriously damage the treadmill. Weather changes or switching on and off
other appliances can cause peak voltages, over-voltage or interference voltage. To limit the danger of
damage to the treadmill, it should be equipped with an over-voltage protective device (not included).
5. Keep power cord away from the carrying roller. Do not leave the power cord below the striding belt. Do
not use the treadmill with a damaged or worn out power cord.
6. Unplug before cleaning or engaging in maintenance work.
7. Make sure the striding belt is always tense.
3. ASSEMBLY PARTS LIST
No. Parts Name QTY No. Parts Name QTY
1 Main frame 1 15 Down line 1
2 Left pillar 1 16 Outer hexagon bolt 4
3 Right pillar 1 17 Round head inner hexagon bolt 2
4 Left & right handle 1 18 Hexagon socket head cap screws 10
5 Up electric meter 1 19
Phillips recessed countersunk
head tapping screw
6
6 Meter cover 1 20
Phillips flat countersunk head
tapping screw
4
7 Motor cover 1 21 Flat shim 6
8 Up cover on left pillars 1
9 Down cover on left pillar 1
10 Up cover on right pillar 1
11 Down cover on down pillar 1
12 Up line 1
13 Middle 1 line 1
14 Middle 2 line 1