Salter BPA-9201, Инструкция и гарантия

Страница: 2 / 116

2 I GB
INTRODUCTION
General Description
Thank you for selecting Salter arm blood pressure monitor. The monitor features blood pressure measurement, pulse
rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken
by the blood pressure monitor are equivalent to those obtained by a trained observer using the cuff and stethoscope
auscultation method.
This manual contains important safety and care information, and provides step by step instructions for using the
product. Read the manual thoroughly before using the product.
Features:
• 60mm x 40.5 mm LCD
• Maximum 60 records
• Measuring during inflation
Indications for Use
The Salter Blood Pressure Monitor is digital monitors intended for use in measuring blood pressure and heartbeat
rate with arm circumference ranging from 22cm to 42cm (about 8¾˝-16½˝). It is intended for adult indoor use only.
Contraindications
1. The device is not suitable for use on pregnant women or women who think they may be pregnant.
2. The device is not suitable for use on patients with implanted,electrical devices, such as cardiac pacemakers,
defibrillators.
Measurement Principle
This product uses the Oscillometric Measuring method to detect blood pressure. Before every measurement, the unit
establishes a “zero pressure” equivalent to the air pressure. Then it starts inflating the arm cuff, meanwhile, the
unit detects pressure oscillations generated by beat-to-beat pulsatile, which is used to determine the systolic and
diastolic pressure, and also pulse rate.
Safety Information
The below signs might be in the user manual, labeling or other components. They are the requirement of standard
and using.
0123
Symbol for “THE OPERATION GUIDE
MUST BE READ”
Symbol for “TYPE BF APPLIED PARTS”
Symbol for “COMPLIES WITH
MDD 93/42/EEC REQUIREMENTS”
Symbol for “ENVIRONMENT PROTECTION
- Waste electrical products should not
be disposed of with household waste.
Please follow local guidelines.
Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”
Authorized Representative in the
European Community
Symbol for “DIRECT CURRENT” Symbol for “Recycle”
Symbol for “MANUFACTURE DATE”
The Green Dot is the license symbol of
a European network of industry-funded
systems for recycling the packaging
materials of consumer goods.
Caution: These notes must be observed
to prevent any damage to the device