Salora HDD-2510, Инструкция по эксплуатации

Страница: 158 / 232

43
Note:
You cannot change the channel or the source during recording (if the end time of a segment has not been
entered or in the case the end of long recordings has not been reached). You have to edit the buffer manually
(
Press Stop ). The DVD recorder will ask you to end the recording. The segment will be stored onto the internal
HDD and you are free to change the channel or source.
Note:
Only one segment of the Timeshift buffer can be selected for saving. You cannot select multiple segments.
If a segment is saved and stored in the title list, this segment and any previous parts will be erased from the
Timeshift buffer.
In Timeshift Mode you can use the following buttons:
Button Function Remarks
HDD/DUB HDD Title List Recording continues
DVD DVD Menu / DVD Playback Recording continues (not if you want
to record a DVD)
USB USB title menu Start Slideshow from USB or record
from USB to DVD.
Recording continues.
Display Display Information Recording continues
Open/Close Open DVD Tray Recording continues
Power On/Off
Set-up
Enter Settings Menu Recording continues
Timer Enter Timer Menu Recording continues
Monitor Change Video Input
PS/IS Change between Progressive Scan
and Interlaced Scan
Note:
(Option: SETUP, HDD, SPACE MANAGEMENT, AUTOMATIC). If STOP is not pressed and the recording
uses all the available space on the internal HDD, the DVD recorder will overwrite all unprotected titles according to
a “First in First out” principle. That does not include any titles that have been marked for copy to DVD.
These files will be stored until the copying is finished. After this procedure, the DVD will display the same data as in
the manual mode, as long as there is no further space for recordings on the HDD anymore.
Note:
(Option: SETUP, HDD, SPACE MANAGEMENT, MANUAL). If STOP is not pressed and the recording uses
all the available space on the HDD, the DVD recorder will STOP recording and asks the user to delete some titles
to free up HDD space.
Note:
If the signal source is DV, the recording will not be in the Timeshift buffer. Press Source (repeatedly) to
select DV as your video source. The remote control will be able to send Play, Pause, Fast/Slow, Forward/Reverse
commands to the camera and start a Recording (
Rec ), Pause (a recording) and Stop (a recording).
You can use SETUP and HDD to erase the entire content of the HDD. Please proceed with caution, as this process
is irreversible. The DVD recorder will ask you: All video programs on the hard disk drive will be lost, continue?
Yes/No (No is default)
HDD Playback Mode