Salora HDD-2510, Инструкция по эксплуатации

Страница: 156 / 232

41
While in Timeshift Mode the following buttons on your remote control can be used to control the audio signals.
Button Function Remarks
CH+/- Change Channel When you change channel the
Timeshift Buffer will be erased. You
can get this information by pressing
SETUP > HDD > Timeshift-buffer >
0...9
FF
Slow
Replay Skip 10 sec backwards in title Left Arrow
Skip Skip 30 sec forwards in title Right Arrow – if you press this button
2 seconds or longer, your recorder
skips to the end of the recording
(Live).
Mute Sound Off / Mute
Vol+/- Increase or decrease volume
When you use the default settings under “Setup” > “Timeshift” > “Timeshift default source” > “Tuner (ON)”, the unit
changes into Tuner Status. If you select “FCVBS (OFF)” Timeshift is automatically activated. Deactivate Timeshift
by turning FCVBS on. If you use the default settings under “Setup” > “HDD” > “Timeshift Buffer” > “Refresh” and
change the channel, all data which was saved using Timeshift will be deleted. No warning message will appear. If
you select “Setup” > “HDD” > “Timeshift Buffer” > “PRESERVE” and then change channel, all data using Timeshift
will be saved.
Note:
If you change the playback source and the Video Standard changes (NTSC/PAL) all data using Timeshift
will be deleted.
Note:
During Timeshift a timer programmed recording can appear. Because you cannot record Timeshift on one
source and view another, the DVD will ask you to choose if the current channel shall be used or Timeshift shall
continue. If there is no response, the Timer recording will be started. This message appears two minutes before the
Timer recording starts.
Remote Control Display
Press Display once Timeshift Buffer Information:
Elapsed playback time
Recording time
Recording time minus 1 hour
Playback Status
Buffer Status
Channel/ Source Information
Dubbing Indicator (during Recording)
Press Display once Important Buttons, Navigation help
Press Display once Exit Information Display
HDD Playback Mode