salmson SIL Series, Инструкции по установке и запуску

Страница: 45 / 152

English
Installation and operating instructions SIL, DIL, PBS 35
5 Product information
5.1 Type key The type key consists of the following elements:
5.2 Technical data
Example: SIL 208-13/5.5
DIL 208-13/5.5
SIL
DIL Flange-end pump as s ingle pump
Flange-end pump as d ouble pump
2 Number of poles, motor
08 Nominal diameter DN of the flange connection [cm]
13 Nominal impeller diameter [cm]
5.5 Rated power [kW]
Example: PBS 65-140/5.5/2/13
PBS Flange-end pump as Mono B loc pump
65 Nominal diameter DN of the flange connection
(pressure side) [mm]
140 Maximum impeller diameter of the pump family [mm]
5.5 Rated power [kW]
2 Number of poles, motor
13 Nominal impeller diameter [cm]
Property Value Remarks
Rated speed 50 Hz version
• SIL/DIL/PBS (2-/4-pole):
2900 or 1450 rpm
• SIL (6-pole): 725 rpm
Depending on pump type
60 Hz version
• SIL/DIL/PBS (2-/4-pole):
3480 or 1750 rpm
Depending on pump type
Nominal diameters DN SIL: 32 to 200 mm
DIL: 32 to 200 mm
PBS: 32 to 150 mm (pressure side)
Pipe and pressure measurement connec-
tions PN 16 flange in accordance with
DIN EN 1092-2
with pressure measurement
connections Rp 1/8 in accordance
with DIN 3858
Permissible min./max. fluid temperature -20 °C to +140 °C Depending on fluid
Ambient temperature min./max. 0 to +40 °C Lower or higher ambient
temperatures on request
Storage temperature min./max. -20 °C to +60 °C
Maximum permitted operating pressure 16 bar (version... -P4: 25 bar) Version...-P4 (25 bar) as special
version at additional charge (avail-
ability depends on the pump type)
Insulation class F
Protection class IP55
Table 1: Technical data