Salini SCG-6182B Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 22

Salini SCG-6182B Скачать руководство пользователя страница 5

-4-

Electrical Caution

CAUTION:

Cleaning operations must only be carried out when the oven is cool and disconnected
from the power supply.



Any work on electric equipment and systems may only be carried out by authorized
qualified persons.



In case of any damage, switch off the appliance and disconnect it from the power supply



If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

Child Safety



WARNING: Accessible parts may become hot during use. Flames can cause burns.



We strongly recommend that babies and young children are prevented from being near to
the appliance and not allowed to touch the appliance at any time.



If it is necessary for younger family members to be in the kitchen, please ensure that they
are kept under close supervision at all times.



Cleaning and user maintenance shall not be carried out by children without supervision.



The packaging materials will be dangerous for children. Keep the packaging materials away
from children. Please dispose of all parts of the packaging according to environmental
obligation.

«
...
3
4
5
6
7
...
»

Содержание SCG-6182B























Отзывы:

Нет отзывов