Salini SCG-6182B Скачать руководство пользователя страница 22

Страница: 22 / 22

-21-

DECLARATION OF CONFORMITY

Australian Standards

This product has been designed and manufactured in accordance with below Australian and

New Zealand codes and specifications.

AS/NZS 5263.1.1 Domestic Gas Cooking Appliances

AS/NZS 60335.1 General Requirements for Domestic Electrical Appliances

AS/NZS 60335.2.102 Specific Requirements for Gas, Oil and Solid-burning Appliances Having

Electrical Connection

AS/NZS CISPR.14.1 Electromagnetic Compatibility for Domestic Appliances

Installation of the appliance must be only be undertaken by an authorised installer who can

provide a compliance certificate; a compliance certificate MUST be provided.

This appliance is intended for domestic use only.

This appliance must be installed in accordance with:

•

AS 5601 – Gas Installations (for Australia)

•

AS/NZS 3000 – Electrical Installations (Wiring Rules)

•

Local gas fitting regulations, building codes and other relevant statutory regulations.

Ensure that the appliance is suitably installed in consideration to adjacent walls, cupboards and

protection for combustible materials in accordance with clauses 6.2.5 and 6.10.1.1 of AS/NZS

5601.1, or clauses 6.9.1 and 6.9.5 of AS/NZS 5601.2 with regard to clearances to combustible

surfaces and materials, and clearances to range hoods and exhaust fans.

International Standards

This product also complies with below International codes and specifications.

IEC 60335-1 General Requirements for Household and Similar Electrical Appliances

IEC 60335-2-102 Specific Requirements for Gas, Oil and Solid-burning Appliances Having

Electrical Connection.

The product specifications in this booklet apply to the specific products and models described at

the date of issue, these specifications may change at any time. You should therefore check with

your Dealer to ensure of latest issue.

Содержание SCG-6182B























Результаты поиска

Содержание SCG-6182B

Отзывы:

Salini SCG-6182B, Инструкция по эксплуатации, Страница: 22 / 22

Результаты поиска

Содержание SCG-6182B

Отзывы: