Salicru SLC TWIN series, Руководство пользователя, Страница: 19 / 61

18
4.6. OVERVOLTAGE PROTECTION (fAX, MODEM, ...),
CONNECTORS RJ-45 (C11) AND (C12) fOR EThERNET
NETWORk.
This connection is not necessary to make for UPS operating, •
and it is only used for transient voltage protection.
Connect the input line (server side) of the communication net-
•
work to the «Input» connector (C11).
Connect the output line (user side) to the communication net-
•
work to the «Output» connector (C12).
i
The ETHERNET network, could not operate if it is connected
wrongly.
4.7. SOfTWARE.
free software - WinPower.
WinPower is the brand of the new UPS monitoring software, which
facilitates a friendly monitoring and control interface. In case of
mains failure, this software gives an automatic Shutdown for a
system made by several PCs. With this software, the users can
monitor and control any UPS in the same Local Area Network LAN
without taking care about the distance among them.
Installation procedure:
Insert the supplied CD. The installation assistance will boot 1.
automatically. Follow the steps stated by itself.
When it is asked, enter the serial number written over the CD.
2.
When the PC reboots, the WinPower software will be showed as a
plug icon with green colour in the system tray, near to the clock.
Graphic screen of WinPower software fig. 21.
USER MANUAL