Salicru Equinox SLC EM Lite, Руководство пользователя

Страница: 76 / 150

76
SALICRU
7. SWITCH-ON SEQUENCE.
7.1. CONFIGURATION OF THE SLC EM LITE,
SLC EM AND SLC EM T WITH THE
EQUINOX2 SOLAR INVERTER.
1.
Only power the inverter with DC voltage and switch off the
solar inverter's AC power switch.
DC
OFF
ON
AC
2.
Once the inverter display has been switched on, follow the
steps below to change the unit's modbus address (only for in-
stallations with the SLC ENERGY MANAGER device:
a.
From the main menu, press ENT X times, depending on the
number of MPPTs in the unit, until you reach the "General
Settings" menu.
b.
Press for 3 seconds to enter the next "Syst. Info" menu.
c.
Press ENT 13 times until you reach the "Modbus Add."
menu, press for 3 seconds to enter and access the numeric
characters; press ENT repeatedly to increase each digit
until the required one is reached. To change the digit, press
ENT for 3 seconds.
To browse the different menus, a short press (1 second)
allows you to scroll between the screens of a specific
menu, while a long press (3 seconds) allows access to the
parameters or subscreens of the selected menu.
x8 (1s)
1 MPPT
x9 (1s)
2 MPPTs
x11 (1s)
4 MPPTs
x17 (1s)
10 MPPTs
x1 (4s) x13 (4s)
x6 (1s)
x6 (1s) Wait Wait
x1 (4s) x1 (1s) x1 (4s)
x1 (4s)