14
SALICRU
5.2. UNLOADING AND UNPACKING
5.2.1. Moving and Unpacking of the Cabinet
The steps to move and unpack the cabinet are as follows:
1.
Check if any damages to the packing. (If any, contact to the
carrier)
2.
Transport the equipment to the designated site by forklift,
as shown in Fig. 14.
Fig. 14.
Transport to the designated site
3.
Open the top plate of the steel-edged wooden case with
slotted awl and pier, followed by side boards (see Fig. 15).
Fig. 15.
Disassemble the case
4.
Remove the protective foam around the cabinet
Fig. 16.
Remove the protective foam
5.
Check the UPS.
a.
Visually examine if there are any damages to UPS
during transportation. If any, contact to the carrier.
b.
Check the UPS with the list of the goods. If any items
are not included in the list, contact to our company or
the local office.
6.
Dismantle the bolt that connects the cabinet and wooden
pallet after disassembly.
7.
Move the cabinet to the installation position.
Attention:
Be careful while removing to avoid scratching the equipment.
5.2.2. Unpacking Power Module
1.
The steps to move and unpack the power module are as
follows:
2.
The packing case must be placed on the platform smoothly,
as is shown in Fig. 17.
Fig. 17.
Place on platform smoothly
3.
Cut the plastic packing belt and scotch tape to open the
carton. (See Fig. 18).
