Salda AMBERAIR COMPACT 7 RH E, Монтаж и инструкция по установке

Страница: 4 / 72

4 | EN AMBERAIR COMPACT RH v2019.08
Main safety rules
Danger
• Before performing any electrical or maintenance tasks make sure, that the device is disconnected from the mains, that all moving
parts of the device have stopped.
• Make sure that the fans can not be accessed through air ducts or branch openings.
• If you notice liquids on electric parts or connections that bear voltage, stop the operation of the appliance.
• Do not conect the device into the mains, that differs from that indicated on the label or on the housing, or in technical documentation.
• Voltage of the mains should comply with the electrotechnical parameters indicated on the label, or in technical documentation.
• The device should be earthed in accordance with the rules of installation of electric appliances. It is forbidden to turn on and use
unearthed device. Follow the requirements of the device’s labels that indicate Danger .
Warnings
• Connection of electricity and maintenance of the device should be performed only by a qualified personnel, in accordance with the
manufacturer’s instructions and valid safety requirements.
• In order to reduce risk during installation and maintenance, suitable protective clothes should be worn.
• Beware of sharp angles while performing installation and maintenance tasks.
• Do not touch heating elements until they haven’t cooled down.
• Some devices are heavy, thus one should be very careful while transporting and installing. Use suitable lifting equipment.
• While connecting electricity to the mains a circuit breaker of suitable size is necessary.
Warning!
• If the device and additional components is installed in a cold environment, make sure that all connections and tubes are properly
isolated. Intake and discharge air ducts should be isolated in all cases.
• Openings of the ducts should be covered during transportation and installation.
• Make sure not to damage the heater when connecting the piping of the water heater. For tightening up, use a wrench/spanner.
Before starting the equipment
• make sure, that there are no strange objects inside;
• manually check whether fans are not stuck or blocked;
• if rotary heat exchanger is installed in the device, make sure that it is not stuck or blocked;
• check the grounding;
• make sure that all components and accessories are connected in accordance with the project or provided instructions.
4. INFORMATION ABOUT THE PRODUCT
4.1. DESCRIPTION
AmberAir Compact 7 RH include the following model options:
Model: 7RH
Model box: SD50+ (T2TB1), SD50 (T3 TB4), MD50+(T3 TB1), MD50(T3 TB4).
Heating electric coil:
EL1 (low power), EL2 ( medium power), EL3 ( high power).
Heating water coil: HW1 ( low power), HW2 (medium power), HW3 (high power, only for vertical), HW4 (extra high power only for vertical).
Right or left models:
R (Right) L (Left). The side where the supply air is located when viewed from the access side.
Fan (plastic/metal impellers): F1 (low power), F2 (medium power), F3 (high power), F4 (extra high power).
Rotor: C (Condensation), E (Hygroscopic), S (Sorption).
Cooling water coil:
HW1 (low power), HW2 (medium power). More power capacity available with accesories.
Control type: C1 MCB, C2 Pre-wiring.
AmberAir Compact is a compact-class ventilation unit with a heat recovery system. Its technical parameters are provided in the tables below.
PARAMETER VALUE VALUE VALUE
Model size 7 RH E 7 RH W 7 RH C
Heat exchange type Rotor Rotor Rotor
Instalation type Horizontal Horizontal Horizontal
Service side Right/Left Right/Left Right/Left
Fan type EC EC EC
Integrated heater/cooler Electrical Water Cooler
Control type MCB or Pre-wiring MCB or Pre-wiring MCB or Pre-wiring
Filter type Bag / panel Bag / panel Bag / panel
Installation version indoor/outdoor indoor/outdoor indoor/outdoor
Rotor drive 0-10V 0-10V 0-10V
Thank you for purchasing the devices of our company!
Not suitable for swimming pools, saunas and other similar facilities.