Salda AMBERAIR COMPACT 7 RH E, Монтаж и инструкция по установке

Страница: 8 / 72

8 | EN AMBERAIR COMPACT RH v2019.08
METAL IMPELLER
7 RH F1 E1 5,00 8 3~ / 400 27 39,02 3~ / 400 32,5 / 50,02
7 RH F1 E2 5,00 8 3~ / 400 30 43,36 3~ / 400 35,5 / 54,36
7 RH F1 E3 5,00 8 3~ / 400 51 73,71 3~ / 400 56,5 / 84,71
7 RH F1 W 5,00 8 3~ / 400 0,8 3,48 1~ / 400 6,3 / 14,48
7 RH F2 E1 7,20 11,6 3~ / 400 27 39,02 3~ / 400 34,7 / 53,62
7 RH F2 E2 7,20 11,6 3~ / 400 30 43,36 3~ / 400 37,7 / 57,96
7 RH F2 E3 7,20 11,6 3~ / 400 51 73,71 3~ / 400 58,7 / 88,31
7 RH F2 W 7,20 11,6 3~ / 400 0,8 3,48 1~ / 400 8,5 / 18,08
7 RH F3 E1 7,20 11,8 3~ / 400 27 39,02 3~ / 400 34,7 / 53,82
7 RH F3 E2 7,20 11,8 3~ / 400 30 43,36 3~ / 400 37,7 / 58,16
7 RH F3 E3 7,20 11,8 3~ / 400 51 73,71 3~ / 400 58,7 / 88,51
7 RH F3 W 7,20 11,8 3~ / 400 0,8 3,48 1~ / 400 8,5 / 18,28
7 RH F4 E1 14,40 23,2 3~ / 400 27 39,02 3~ / 400 41,9 / 65,22
7 RH F4 E2 14,40 23,2 3~ / 400 30 43,36 3~ / 400 44,9 / 69,56
7 RH F4 E3 14,40 23,2 3~ / 400 51 73,71 3~ / 400 65,9 / 99,91
7 RH F4 W 14,40 23,2 3~ / 400 0,8 3,48 1~ / 400 15,7 / 29,68
7RH FILTER DATA
Filter code
Type Width, [mm] Height, [mm] Depht, [mm] Bag nr. Class* Efficiency*
Filtras FMK 592x490x350-7/F9 Bag filter 592 490 350 7 ePM1 85
Filtras FMK 592x490x350-7/M5 Bag filter 592 490 350 7 EePM10 60
Filtras FMK 592x490x350-7/SGF7 Bag filter 592 490 350 7 ePM1 70
Filtras FMK 592x490x570-8/F9 Bag filter 592 490 570 8 ePM1 85
Filtras FMK 592x490x570-8/M5 Bag filter 592 490 570 8 EePM10 60
Filtras FMK 592x490x570-8/SGF7 Bag filter 592 490 570 8 ePM1 70
Filtras MPL 592x490x46 F7 Panel filter 592 490 46 - ePM1 70
Filtras MPL 592x490x46 F9 Panel filter 592 490 46 - ePM1 85
Filtras MPL 592x490x46 M5 Panel filter 592 490 46 - EePM10 65
Filtras MPL 592x490x46 G4 Panel filter 592 490 46 - Coarse 85 50
* - according to ISO 16890.
4.4. OPERATING CONDITIONS
PLACE OF OPERATION
INDOORS / OUTDOORS / INDOORS AND OUTDOORS /
OUTDOORS WITH SPECIAL ACCESSORIES
Operation in explosive environment prohibited
Transporting of the polluted air prohibited
Outdoor air temeperature without preheater -23/+40
°C
Outdoor air temperature limits with a selected pre-heater on an air duct -40/+40
°C
Outdoor air max humidity 90
%
Temperature limits of an extracted air +15 / +40
°C
Extract air max humidity 60
%
Maximum room temperature for installing the unit 0 / +40
°C
The air handling units installed outdoors shall be started only when the following obligatory conditions established by the manufacturer are met:
• Units that are stored at the site before installation shall be sealed using additional means in order to prevent the accumulation of moisture inside
the unit.
• If the unit is installed and is not started for continuous operation, it must be ensured that no warm/humid air enters the unit through air ducts
and that no moisture condensates inside the unit.
• If the ventilation units stand idle for a long time or are started infrequently, the system must be blown down at the maximum capacity 1/24 h to
dehumidify.
• Voltage to the automatics of the unit is installed and connected; the system of water products is filled with glycol/water.
In case of failure to comply with the requirements set out above, the manufacturer shall have the right not to refute the warranty in respect of the
occurrence of moisture/water in damaged components.