ACCESSORIES
Several accessories for the XFVP-L are available which include patch cables, attenuators and
external power supplies. Consult the accessories list.
COMPATIBILITY
The XFVP-L probe requires an external oscilloscope with internal 50 termination. The
termination is needed to provide appropriate high-frequency transmission of the signal. If the
oscilloscope does not have internal 50 termination, an optional BNC terminator (code
XFVPTERM) can be supplied.
A bandwidth of at least 300MHz is recommended. Also modern digital scopes do have a useful
Hi-Res mode that can lower the measurement noise substantially. (Read the document “
XFVP
Probe Measurements Guide
”). The same can be said about the scope ADC resolution.
XFVP PROBE CONTENTS
Each package contents must include:
- Carrying case
- XFVP-L probe head and receiver with 1m coaxial output cable
- SMB unterminated coax cable
- Quick users guide
- Tripod
- Adjusting tool
- Safety list sheet
Ω
Ω
BR-XFVPL-Rev 2. 12/22
