Sakai SW800 Series, Руководство по ремонту

Страница: 79 / 159

3-107
Inspection & Adjustment
2) To adjust the setting, loosen locknut (15)
and rotate adjust screw (16).
• Adjust screw rotation:
Clockwise
➡
Pressure increases
Counterclockwise
➡
Pressure decreases
• Increase or decrease in pressure per 1/4
turns of adjust screw:
0.38 MPa (3.9 kgf/cm 2 ) {55 psi}
3 ) For the pressure measurement during the
adjustment, use procedures as described
in steps 1-1) to 1-3) above.
4
)
When the adjustment is complete, tighten
locknut (14) and recheck to see if correctly
adjusted.
5) If the valve is beyond adjustment, take
necessary measures referring to relevant
items in “TROUBLE-SHOOTING”.