– 48 –
2) Decide the correct direction of run and make the
machine run forward to the ramps.
3) Draw the wire rope from the trailer winch and put its
hook on the hooking point
①
or
②
of the roller.
4) Place the unloader valve located at the operator’s
station to the UNLOAD position (See “Unloader valve”
on page 28).
5) With the engine running at idle, perform loading by
means of the trailer winch.
6) When the loading is completed, set the unloader valve
back in the ONLOAD position.
7) Locate the machine correctly on the trailer.
2.9.2 Self-propelling
1) Engage the trailer brake and chock its wheels. Fix the ramps so that the machine and
trailer are completely aligned.
☆
The angle between the ramps and ground must be
less than 15 degrees.
☆
Leave a proper space between the ramps
according to the width of the roller drum.
2) Decide the correct direction of run and conduct loading
or unloading at low speed.
For loading, run forward at low speed.
For unloading, run backward at low speed.
3) Locate the machine correctly on the trailer.
1
2
Foward run at
low speed
Backing at
low speed
Ramp
Wooden block
Less than 15°
Blocks
