Sakai SW770 Скачать руководство пользователя страница 25

Страница: 25 / 87

– 21 –

2.1.3 Switches

Starter switch

Starts and stops the engine.
OFF : The key can be removed in this position. All the

electric systems are switched off. To shut down
the engine, move the key to this position.

ON : The charging circuit and lamp circuit are charged

with electricity. Let the key stay in this position
after the engine has started.

START : The engine is cranked and gets started. The

moment the engine has started, release the key.
It will automatically return to the ON position.

Lamp switch

Has three positions.

:  All lamps are switched off.
:  Side marker lamps and tail lamps come on.
:  In addition to the above-mentioned lamps, the

headlamps become bright.

Dimmer switch

: The upper beam of headlamps lights up.
: The lower beam of headlamps lights up.

Turn signal lever

Turn signal lamp flashes when the turn signal
lever is operated.

Left turn : Move the lever forward.
Right turn : Move the lever backward.

NOTE: The lever does not return to the OFF position

even if the steering wheel is turned back.

OFF ON S

TAR

Dimmer switch

Lamp switch

Содержание SW770
























































































Результаты поиска

Содержание SW770

Отзывы:

Похожие инструкции для SW770

Бренды по названию

Популярные бренды

Sakai SW770, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SW770

Отзывы:

Похожие инструкции для SW770

Бренды по названию

Популярные бренды