Sakai SW770 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 87

background image

– 12 –

• Inspect or handle the battery with the engine shut down

and the starter key in the OFF position.

• Keep metallic items such as tools away from the battery

terminals.

• Loose terminals can cause sparks leading to an

explosion. Secure the terminals tightly.

■

Jump-starting the engine.

• Wear safety goggles when jump-starting the machine.
• When starting from another machine, do not allow the

two machines to make contact with each other.

• When connecting the battery cables, start with the

positive terminal. For disconnection, start with the
negative one.

• Do not allow a tool to bridge between the positive

terminal and machine body. This can generate
dangerous sparks.

• Do not connect the booster cable to wrong terminal. NEVER connect the positive terminal

to the negative.

• Final connection to the engine block of the disabled machine can cause sparks. The

connecting point should be as far as possible from the battery.

1.9 Towing

  • To tow the machine, use wire ropes with ample strength.
  • Do not perform towing on a slope.
  • Do not use towing ropes twisted, kinked or damaged.
  • Do not stride towing cables.
  • Keep everyone away from the space between the machine and the towing vehicle when

connecting the two.

• Align the connecting portions of the machine and towing vehicle straight when coupling the

machine.

OFF ON

STA

RT

WARNING: Negligence of these instructions can lead to accidents.

«
...
14
15
16
17
18
...
»

Содержание SW770
























































































Отзывы:

Нет отзывов

Похожие инструкции для SW770

Бренд: Tascam Страницы: 27

Бренд: Jay-Lor Страницы: 72

Бренд: MacDon Страницы: 198

Бренд: M-Triangel Страницы: 6

Бренд: JB Systems Страницы: 7

Бренд: 3A HEALTH CARE Страницы: 16

Short/cut 2000 Audio Editor

Бренд: 360 Systems Страницы: 4

Бренд: Abbott Страницы: 2

FreeStyle Libre

Бренд: Abbott Страницы: 3

Бренд: abc Страницы: 8

Бренд: Water Witch Страницы: 2

Бренд: Falltech Страницы: 48

Бренд: UNI-T Страницы: 4

UPO3000E Series

Бренд: UNI-T Страницы: 94

Бренд: uniprox Страницы: 3

Бренд: Jackson Страницы: 2

Бренд: Lencarta Страницы: 6

Бренд: Life Fitness Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды