Sakai SV414, Руководство по ремонту

Страница: 225 / 294

9-011
TROUBLESHOOTING
2-2. Fault Codes
2-2-1. Fault code list
Fault
Code SPN FMI
Cummins Description Effect
111 629 12
Engine Control Module Critical Internal
Failure
Bad Intelligent Device or Component •
Engine may not start or may be difficult to
start.
115 612 2
Engine Magnetic Speed/Position Lost Both of
Two Signals
Data Erratic, Intermittent, or Incorrect •
The engine will shut down or will not start.
122 102 3
Intake Manifold 1 Pressure Sensor Circuit
Voltage above normal, or shorted to high
source
•
Possible reduced engine performance.
123 102 4
Intake Manifold 1 Pressure Sensor Circuit
Voltage below normal, or shorted to low
source
•
Possible reduced engine performance.
131 91 3
Accelerator Pedal or Lever Position Sensor 1
Circuit
Voltage above normal, or shorted to high
source
•
The engine will operate in Limp Home mode.
132 91 4
Accelerator Pedal or Lever Position Sensor 1
Circuit
Voltage below normal, or shorted to low
source
•
The engine will operate in Limp Home mode.
133 974 3
Remote Accelerator Pedal or Lever Position
Sensor 1 Circuit
Voltage above normal, or shorted to high
source
•
Remote accelerator will not operate.
134 974 4
Remote Accelerator Pedal or Lever Position
Sensor 1 Circuit
Voltage below normal, or shorted to low
source
•
Remote accelerator will not operate.
143 100 18
Engine Oil Rifle Pressure
Data Valid But Below Normal Operating
Range
Moderately Severe Level
•
•
Possible reduced engine performance.
144 110 3
Engine Coolant Temperature 1 Sensor Circuit
Voltage above normal, or shorted to high
source
•
Fan will stay ON if controlled by the engine
control module (ECM).
145 110 4
Engine Coolant Temperature 1 Sensor Circuit
Voltage below normal, or shorted to low
source
•
Fan will stay ON if controlled by the engine
control module (ECM).
146 110 16
Engine Coolant Temperature
Data Valid But Above Normal Operating
Range
Moderately Severe Level
•
•
Progressive power and/or speed derate
increasing in severity from time of alert. If
the Engine Protection Shutdown feature
is enabled, the engine will shut down 30
seconds after the red STOP lamps starts
flashing.
147 91 1
Accelerator Pedal or Lever Position 1 Sensor
Circuit Frequency
Data valid but below normal operational
range
Most Severe Level
•
•
The engine will operate in Limp Home mode.