̶
19
̶
7. Inspection and Maintenance
7.5. Rammer cylinder
Change oil after initial 50 hours of operation
for the first time, and every 200 hours of
operation thereafter. Wipe off the oil stuck
on the rammer after oil has been changed.
How to change oil:
Remove the drain plug and tilt the rammer
to discharge oil, then fill in the new oil.
Position the tamping shoe to be level to sup-
ply oil until it will overflow out of the drain
plug.
Quantity specified
RS45 : 500cc
RS65 : 800cc
RS75 : 900cc
Drain plug
7.6. Checking bolts in each section for their tightness
Check the mounting bolts for tightness. In particular, pay special attention around to the bolts
securing engine, crankcase, tamping shoe, and control handle.
RS45,RS65
RS75
