̶
21
̶
9. For a long-term storage
9. For a long-term storage
(1) Drain fuel from the fuel tank and the carburetor completely and close the fuel cock.
(2) Pull the starter knob slowly until resistance is felt and leave it in this condition.
(3) Check the engine and the vibrator for oil leakage.
(4) Wipe off oil stains, if any, on the rubber dampers.
(5) Check bolts and nuts for tightness and re-tighten them as necessary.
(6) Put the cover over the rammer and store it in a dust-free, dry area.
(7) Remove the ignition plug to inject approximately 5cc of engine oil into the cylinder.
Then fit the plug and tighten it after the starter knob has been pulled up 2 or 3 times
repeatedly.
