̶
9
̶
3. Inspection before operation
3.1. Engine
Refer to a separate Engine Operation Manual for the engine.
3. Inspection before operation
Oil gauge
Fill port
Drain plug
Maximum oil level
Minimum oil level
(Refill is required)
①
Remove the oil gauge and wipe off oil
stuck on the gauge with a rag.
②
Push the oil gauge against the oil fill port
without screwing it in to check oil level.
③
Refill oil until it comes to the upper limit
mark when the level is insufficient.
Be sure to check and refill oil with the engine held level.
Check the oil level again at approx. 3 minutes after it has been refilled.
Do not supply oil more than the specified since over-supply of oil may
result in blowing out of oil and poor output of the engine.
Shortage of oil may cause seizure of the engine.
If an oil other than the specified is used, service life of engine is likely to
be shortened.
•
•
•
•
IMPORTANT
Screw in the oil gauge securely after oil level has been
checked and refilled .
•
CAUTION
3.2. Checking oil in the engine chamber
