SAJ SU3KMTLI, Руководство пользователя

Страница: 10 / 31

User Manual
13
User Manual
14
4.2 FURTHER INFORMATION
If you have any further questions concerning the type of accessories or
installation, please check our website www.saj-solar.com or contact our
service hotline.
5. INSTALLATION
5.1 SAFETY
·
·
·
SAJ grid - tie solar inverter is cooled by natural flow of air behind the
inverter.
SAJ grid - tie solar inverter is designed for installation both indoors and
outdoors.
Please only mount the inverter in the direction as illustrated above.
Figure 5.1
Bad cooling
15
5.2 MOUNTING INSTRUCTIONS
DANGER
·
·
o not
·
DANGER to life due to potential fire or electricity
shock.
D install the inverter near any inflammable or
explosive items.
This inverter will be directly connected with HIGH
VOLTAGE power generation device; the installation
must be performed by qualified personnel only in
compliance with national and local standards and
regulations.
NOTICE
·
·
exposed
·
NOTICE due to the inappropriate or the harmonized
installation environment may jeopardize the life span of
the inverter.
Installation directly under intensive sunshine
is not recommended.
The installation site must have good ventilation
condition.
·
·
·
·
·
·
·
Installing the inverter under strong sunshine is not recommended; the excess
heating might lead to power reduction.
·
·
Make sure enough ventilation at installation spot; insufficient ventilation
may affect the operating performance of the inside electronic components,
even shorten the life span of the device.
Installation of the inverter in the vertical direction is recommended.
Tilted backward max.15 degree is allowed.
Never install the inverter forward, horizontally or even upside down.
For the convenience of checking the LCD display and possible maintenance
activities, please install the inverter at eye level.
Make sure the wall you selected is strong enough to handle the screws and
the weight of the inverter.
Ensure the inverter is properly fixed to the rear panel.
The ambient temperature of installation site should be between - 25 °C and
+60 °C ( between -13 °F and 140 °F ) .
Figure5.2
Direction
Above
Below
Side
Front Minimum Clearance
30 cm
50 cm
30 cm
5 cm
5.3 SAFETY CLEARANCE
To make sure the ventilation of the installation spot, if there are multiple SAJ
grid-tie solar inverters installed in the same area, the following safety
clearance shall be followed for proper ventilation conditions.
5cm
30cm
5
0
c
m
3
0
c
m
30cm