This document is property of Saitek Srl. Copying it and/or spreading the contents to third parties without authorization is forbidden.
Saitek Srl reserves the right to modify the present document at any moment without prior notice. 04-2018
FLAME CONTROL
-
SERIES
page 2 di 5
ELECTRODE / UV FLAME DETECTION
IN ACCORDANCE WITH STANDARD EN 298
ASSEMBLY .
-
Mounting position as desired
:
-
Assembly of the fixed rear part,
through 4 preformed holes to be
removed by pressure.
-
Dimensions 117 x 127 x 122 mm
-
Arranged for pipe fixing collar
-
For the wiring there are 2 pre-fractures
PG9 on the back.
-
can be supplied already wired,
otherwise make the necessary holes
only in the rear part and use cable
glands that guarantee at least the
same degree of IP protection declared
:
Panel mount: rectangular hole and overall
dimension.
-
Dimensions 47 x 123 x 105 mm
RECOMMENDED CABLES .
IONIZATION
: Maximum length 10 meters
with recommended section not less 1 mm.
Laying away from sources of disturbance,
avoid external electrical influences.
WIRING .
Remove power from the system.
In three-phase systems, use the same
phase on the inputs.
