Sagitter ARCHERB1, Руководство пользователя

Страница: 20 / 28

20
5. - SETUP
5.1 – MENU
ADDRESS Address = 001 Set DMX address
MODE 13 Ch 13 channels mode
14 Ch 14 channels mode
16 Ch 16 channels mode
Auto (Alone) Auto mode Alone
Auto (Master) Auto mode Master
Sound (Alone) Sound mode Alone
Sound (Master) Sound mode Master
LAMP Lamp OFF Lamp OFF
Lamp ON Lamp ON
Reset time Lamp hours reset
RESET Reset NO
Reset YES
OPTION Pan/Tilt swap (ON/OFF) Swap Pan/Tilt
Pan reverse (ON/OFF) Pan reverse
Tilt reverse (ON/OFF) Tilt reverse
Lamp on by power (ON/OFF) ON= lamp ON – power ON
OFF= lamp OFF – power ON
Shortcut (ON/OFF) ON=from last gobo to the first: direct
OFF= from last gobo to the first: reverse
DMX lost set (ON/OFF) ON=if no DMX, the projector stay in the last position
OFF= if no DMX, the projector goes to zero
Display reverse (ON/OFF) Display reverse
Display delay off (ON/OFF) ON=display switches of after some minutes
OFF=display always on
Reset default (ON/OFF) Default reset
Lamp OFF – DMX address = 001
SETUP Password Password for calibration = 008
Calibration Pan / Tilt / Color / Gobo / Prism 1 / Prism 2 / Frost /
Focus / Dimmer
Mic sensitivity Microphone sensitivity
INFORMATION Temperature Internal temperature
Lamp time Lamp hours
ID ID address
Version Software version
WIRELESS (active only
with optional wireless
board) Enable Wireless (ON/OFF) Enable / disable Wireless
Enter 3S Unlink Unlink wireless
Status (DMX ON, Linking, NO
DMX, Unlink) Wireless status display
5.1.1 “WIRELESS” FUNCTIONS:
ENABLE WIRELESS:
- ON = This option enables Wireless.
- OFF = This option disables Wireless.