Proc Sheet 1 12
myC5-2v, myC5-2m
5HPRYHDQG3ODFH
)/$3ELJZLQGRZ
1/1
WKLVRSHUDWLRQPXVWEHPDGHDIWHUOLFHQVH6$*(0
7RROV
- Tweezers.
- Upper housing myC5-2 fixture PN SAGEM
Identification
3UHOLPLQDU\RSHUDWLRQ
1. Remove the battery (
Proc Sheet 0 01
).
2. Remove mobile lower housing (
Proc Sheet 1 01
).
3. Remove equipped electronic board (
Proc Sheet 1 18
).
4. Remove the keypad (
Proc Sheet 1 04
).
5. Remove mobile upper housing (
Proc Sheet 1 13
).
6. Remove lower housing of the FLAP (
Proc Sheet 1 26
).
5HPRYDOSURFHGXUH
1. Press the window inside out to pull it out from the FLAP lower housing ( 1 ).
2. Take out the window and it adhesive ( 2 ).
3ODFHPHQWSURFpGXUH
1. Position the window ( 3 ) and stick it on FLAP lower housing ( 4 ).
)XUWKHURSHUDWLRQ
1. Place lower housing of the FLAP (
Proc Sheet 1 26
).
2. Place mobile upper housing (
Proc Sheet 1 13
).
3. Place the keypad (
Proc Sheet 1 04
).
4. Place equipped electronic board (
Proc Sheet 1 18
).
5. Place mobile lower housing (
Proc Sheet 1 01
).
6. Place the battery (
Proc Sheet 0 01
).
Risk of the procedure :
•
Score the lower casing of the FLAP.
1
2
3
4
Procedure
Symptom
Test
REF MTB DTS 1- Indice A - December 16 2005
Page 5-13