5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications
document. Reproduction and disclosure prohibited
Page 5-59
Field
Action
Default
Enable NAT
Check the box to activate the NAT
function.
Checked
Enable Firewall
Check the box to activate the Firewall
service.
Checked
Enable IGMP Multicast
Check the box to activate the IGMP
function.
Not checked
Enable WAN Service
Check the box to activate the remote
network service (WAN).
See the note of
information
below.
Checked
Service Name
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: pppoa_0_35_1.
Note:
You may enter another service
name.
pppoa_0_35_1
The “
Enable WAN Service
” function makes it possible to disable connection types in
a list to use only the selected connection type. The "
WAN
" menu of the
"
Advanced Status
" section shows the "State is disable" if “
Enable WAN Service
”
has not been selected.
•
Click on the
Next
button to continue configuring the remote network (WAN) in PPPoA
mode.
Содержание F@st 2644
Страница 1: ...SAGEM F stTM 2604 SAGEM F stTM 2644 Reference Manual 253 080 888 A Edition of May 2008...
Страница 2: ......
Страница 231: ......