5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications
document. Reproduction and disclosure prohibited
Page 5-75
Field
Action
Default
PPP IP extension
Check the box to allocate the public address
obtained from the DHCP server of your
I
nternet
S
ervice
P
rovider (ISP) to your
computer. Your router will then act as a bridge
between the server and your computer.
_
Use Static IP Address
Check the box to use the static IP address.
_
IP Address:
5
Enter the static IP address.
0.0.0.0
Retry PPP password on
authentication error
Box
Not checked
Configure PPP MTU
Enter an MTU (
M
aximum
T
ransfer
U
nit) value.
This value (in bytes) is between 38 and 1492
(see Note).
1492
Enable PPP Debug mode
Check the box to use the PPP Debug mode.
In the event of connection failure, this option
will enable you to trace a possible problem in
the SYSLOG file.
Box
Not checked
Bridge PPPoE frames
between WAN and local
ports
Check the box to enable the router when
bridging the frames between WAN and local
Ethernet ports
Checked
Only Bridge PPPoE
Frames
Check the box to filter out all the non-PPPoE
packets when bridging the frames between
WAN and local ports.
Checked
Note:
The MTU specifies the maximum size of the data used (IP packets) expressed as a
number of bytes.
•
Click on the
Next
button to continue configuring the remote network (WAN) in
PPPoE/PPPoA mode.
Содержание F@st 2644
Страница 1: ...SAGEM F stTM 2604 SAGEM F stTM 2644 Reference Manual 253 080 888 A Edition of May 2008...
Страница 2: ......
Страница 231: ......