2 - Description and connection of router
SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A
Page 2-6
Sagem Communications
document. Reproduction and disclosure prohibited
2.3 Installing your SAGEM F@st
TM
2604/2644
2.3.1 Powering
up
¾
First connect the end of the mains adapter lead, supplied with the equipment, to the PWR
socket on your Residential Gateway,
¾
Connect the adapter to a nearby power outlet,
¾
Switching
on,
¾
The
LED will light up first, followed by the four Ethernet LEDs (1 to 4), then these last
four LEDs will be off. The
and Ethernet (which corresponds to the connected interface)
LEDs should be steady and the
LED blinks during the establishment of the ADSL link,
then steadies like the
LED. The
LED should be steady and turn from "
Red
" to
"
Green
" when a PPP session has been created.
Ces dernières
Note:
It lasts around one minute.
2.3.2
Connecting the ADSL cable
¾
Connect one end of the RJ11/RJ11 cable supplied with the equipment to the
ADSL
socket
of your Residential Gateway.
¾
Connect the other end of this cable as shown in the Figure 2.3.
Содержание F@st 2644
Страница 1: ...SAGEM F stTM 2604 SAGEM F stTM 2644 Reference Manual 253 080 888 A Edition of May 2008...
Страница 2: ......
Страница 231: ......