Sagem Monetel EFT930S, Руководство по установке

Страница: 22 / 40

22/39 3000139813-02/650
1. SAFETY INSTRUCTIONS
A- Cutting the power supply to the EFT930S:
Disconnect the power adapter from the power supply network.
B-
Lithium battery:
The EFT930S has a lithium battery which is not accessible to the operator. Only a trained and qualified
person may be authorized to open up the device and work on this component. See the section
"Maintenance", subsection "Lithium battery".
C-
Power supply network:
You should provide a socket for the incoming power supply satisfying the following points:
• socket installed near the equipment and easy to access;
• socket meeting the standards and regulations in force in the country of use;
For Pluggable Equipment Type A, the protection in the installation is assumed to be 20A.
D-
Telephone network:
You should provide an incoming telephone socket meeting the standards and regulations in force in the
country of use.
E-
Connector access covers:
The connector access covers, located underneath the terminal, must be in place during its normal use (see
section "Making the connections").
F-
SAM reader access cover:
The SAM reader access cover, located underneath the terminal, must be in place during its normal use (see
section "SAM module installation/removal").
G- Ethernet connection:
The Ethernet used must remain inside the building. This link is a SELV circuit (Safe Extra Low Voltage)
according to standard EN60950.