![background image](http://html1.mh-extra.com/html/sage/rio-six/rio-six_instruction-manual_3433702070.webp)
S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
70
REV. 10-SIX/SRX
Totalizer
Total Units
[Fast Key 3,2,2,1]
Displays the units of measurement for the totalized
value.
Total
[Fast Key 3,2,2,2]
Displays the totalized value in the selected units of
measurement.
Pulse Output
Pulse Count
[Fast key 3,2,3,1]
Provides the number of units per pulse. Example will
be a Pulse Count of 100 and units are set to SCF,
then one pulse is equivalent to 100 SCF.
Pulse Duration
[Fast Key 3,2,3,2]
HART
Poll Address
[Fast Key 3,2,4,1]
Used multi drop installations to identify an individ-
ual instrument. Values can range between 1 and 15.
If used in a multi drop configuration the 4-20mA
output will be set to 4 mA. The default setting is a
Poll Address = 0 with the 4-20 mA analog signal
operational.
Loop Current Mode
[Fast Key 3,2,4,2]
Allows the user to select whether the loop current is
enabled (active) or disabled (fixed at 4mA) regardless
of the poll address setting.
Number of Request Preambles
[Fast Key 3,2,4,3]
Required HART command – indicates the number of
preambles required by the instrument for HART com-
munication.
DEVICE INFORMATION
Tag
[Fast Key 3,3,1]
Enter a 8 digit tag which can be used to identify the
instrument
Long Tag
[Fast Key 3,3,2]
Enter up to a 32 digit tag which can be used for any
purpose desired by the user.
Descriptor
[Fast Key 3,3,3]
A 16 character entry which can be used for addition-
al identification of the instrument.
Message
[Fast Key 3,3,4]
A 32 character entry which can be used for identifi-
cation or other purposes.
Date
[Fast Key 3,3,5]
Enter date code; often used to enter last date a con-
figuration change had been made.
Meter S/N
[Fast Key 3,3,6]
Factory entry of the serial number of the instrument
Final Assembly num
[Fast Key 3,3,7]
User entered identification which may be used for
future reference
REVISIONS:
•
Universal Revision Number
[Fast key 3,3,8,1]
Identifies the HART specification used in the
design of the instrument.
•
Field Device Revision Number
[Fast Key 3,3,8,2]
Provides the instrument revision for HART
compatibility
•
Software Revision Level
[Fast Key 3,3,8,3]
Provides the software revision used by the
instrument
•
Hardware Revision Level
[Fast Key 3,3,8,4]
Provides the Hardware revision level of the
instrument
FACTORY
Flow Factors and TC Factors
Displays factory entered calibration values for the
instrument
Содержание RIO SIX
