Safire DVR6100V-H Series, Руководство пользователя

Страница: 56 / 161

User Manual of DVR6100V-H Series DVR
55
5.3 Configuring Motion Detection Record
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event
takes place, the device can analyze it and perform some response actions to handle it. Enabling motion
detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio
warning, notify the surveillance center and so on. In this chapter, you can follow the steps to schedule a record
which triggered by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
Figure 5.13 Motion Detection
2. Configure Motion Detection:
1) Select the camera to configure.
2) Check the checkbox after Enable Motion Detection .
Note: By default, the motion detection is enabled and configured in full screen.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for
all the area shot by the camera, click Full Screen . To clear the motion detection area, click Clear .
Figure 5.14 Motion Detection- Mask
4) Click the beside Settings and the message box for channel information will pop up.