Safire DVR6100V-H Series, Руководство пользователя

Страница: 52 / 161

User Manual of DVR6100V-H Series DVR
51
reference.
4) Configure the pre-record, post-record time, expired time, redundant record (this option is only
available when the HDD mode is Group ) and whether you want to record audio.
Pre-record: The time you set to record before the scheduled time or event. For example, when an
alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera
records it at 9:59:55.
Post-record: The time you set to record after the event or the scheduled time. For example, when
an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it
records till 11:00:05.
Expired Time (day): The expired time is the longest time for a record file to be kept in the HDD,
if the deadline is reached, the file will be deleted. You can set the expired time to 0, and then the
file will not be deleted. The actual keeping time for the file should be determined by the capacity
of the HDD.
Redundant Record: Enabling redundant record means you save the record files in the redundant
HDD. See Chapter 5.7 Configuring Redundant Record .
N otes:

The Redundant Record option is only available when the HDD mode is Group.

The redundant record is used when you want to save the record files in the redundant HDD.
You must configure the redundant HDD in HDD settings. For detailed information, see
Chapter 10.3.2 Setting HDD Property .
Record Audio: Check the checkbox to record the sound, or uncheck to record the image without
sound.
Enable 960Mode: Enable the encoding at WD1 (PAL: 960×576, NTSC: 960×480) resolution for
the analog cameras. You can also uncheck the checkbox to disable it.
5)
Select the Main Stream and Substream for analog camera recording. When the substream is
selected, you can record for a longer time with the same storage space.
6) If you want to copy the current main stream settings to other analog camera (s), click Copy to
enter the Copy Camera interface. Select the analog camera (s) and click OK to finish the copy
settings.
Figure 5.5 Copy Camera Settings
7) On the Record settings interface, click Apply to save the settings.
Note: You can click the Restore button to restore the current main stream settings to the default
parameters.
3. Set encoding parameters for sub-stream.
1) Click the Substream tab to enter the Substream settings interface.