Safire DVR6100V-H Series, Руководство пользователя

Страница: 31 / 161

User Manual of DVR6100V-H Series DVR
30
3.2 Operations in Live View Mode
In live view mode, the following functions can be realized:
•
Single Screen : showing only one screen on the monitor.
•
Multi- screen : showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen
on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Playback : play back the recorded videos for current day.
•
Start Recording : start all-day normal recording or motion detection recording for all channels.
•
Aux/Main Output Switch: the DVR will check the connection of the output interfaces to define the main
and auxiliary output interfaces. When both HDMI and VGA are connected, or either one is connected, it is
used as the auxiliary video output for live view, recording and PTZ controls; When both HDMI and VGA
are not connected, it is used as the main video output for live view playback, recording, PTZ control and
menu operations.
When the aux output is enabled, you can do some basic operation on the live view mode for the Aux output,
while no operation is allowed for the main output.
3.2.1 Using the Mouse in Live View
In the live view mode, use the mouse to right-click on the window to access the following menu:
Figure 3.1 Right-click Menu
Table 3.2 Mouse Operation in Live View
Name Description
Enter the main menu of the system by right-clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown list.
Adjust the screen layout by choosing from the dropdown list.
/
Start all-day normal recording or motion detection recording for all channels.
Play back the video of the selected channel.
Switch to the auxiliary output mode and the operation for the main output is disabled.
Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
operation is disabled; you need to use the mouse double click for twice to back to the
Main output.
Set the video output mode to Standard, Bright, Gentle or Vivid.
/
Switch to the previous / next screen.
/
Enable/disable the auto-switch of the screens.
Note: The dwell time of the live view configuration must be set before using Start