2. With the crank handle pushed into unit in recovery mode, the cable from the unit should
pay out and retract smoothly when rotating the handle in the corresonding clockwise or
counterclockwise direction.
3. With the crank handle pulled out from the unit in Self Retracting Device mode:
a. Pull the lifeline sharply to test locking function
b. Lifeline should lock and subsequently retract smoothly and completely back into unit
without hesitation or stoppage.
c. Inspect entire length of lifeline for any damage including, but not limited to, fraying,
crushing, bird caging, chemical exposure, heat/welding spatter, and kinking. User
should always wear gloves when inspecting lifeline to prevent injury in the event of
cable
damage.
User Manual
V1.0 2020 Copyright SafeWaze
Page 15
Inspection Log
Product lifetime is indefinite as long as it passes pre-use and Competent Person inspections. User
must inspect prior to each use. Competent Person other than the user must complete formal
inspection at least annually. Competent person to inspect and initial table below:
Date of First Use:_______________
Date
Inspection
Items Noted
Corrective
Action
Initials
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
