16
Figure 10: Installing a Router
Bit (SPM301 shown)
Installing a Router Bit (all models):
1. Unplug tool and disconnect air supply.
2. Select correct router bit for your application.
NOTE: (Contact your machine dealer or SSM (763-755-1600) for help in selecting the appropriate
router bit for your materials and applications).
3. Using the wrenches provided, loosen the collet nut (by turning
counter clockwise when looking “down”) (Fig.
10), while holding spindle nut. Remove the router bit.
4. Insert new bit into collet. Finger tighten collet nut.
5. Position the Bit Gauge (Fig. 10) against the router mount (Fig. 10) and pull the router bit up against
the bottom of the Bit Gauge.
6. Tighten the collect nut securely, while holding the spindle nut.
IMPORTANT:
Select the correct bits for your needs. Consult with your machinery dealer, or with the SSM
customer service department
(763-755-1600)
to determine the best bits for your application(s).
Always use the supplied Bit Gauge (Fig. 10 & 11) when installing bits.
Always use supplied Bit Gauge (Fig. 10 & 11) when installing bits. Failure to do so could result in the bits
colliding with the machine table or the drill when the machine is cycled. If your Bit Gauge is missing or
damaged contact Safety Speed for a replacement (
763-755-1600).
Bit Gauge
Collet Nut
Spindle Nut
Router Mount
Router Bit
