safety precaution HTP-T32G, Руководство пользователя

Страница: 28 / 55

H.264 IP Camera Manual
28/4
z
RTSP Port
RTSP port used for RTSP-based connection
‰
RTSP Authentication
z If RTSP Authentication is set to on the Network page, user should enter correct User ID and
Password when any RTSP client is connected.
‰
SNMP
Setup for using SNMP (Simple Network Management Protocol)
z
SNMP Listen Port:
The port is for connecting external devices when system operates as a
SNMP client. SNMP is not used by setting 0 value.
z
SNMP Trap Destination IP
: Set the SNMP Trap Destination IP.
z
SNMP Trap Destination Port:
Set the SNMP Trap Destination Port. SNMP is not used by
setting 0 value.
‰
Multicast
z
Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255. The
selection can be used only when media protocol is set to Multicast. The multicast address must
be the same for the system to be connected using multicast protocol.
‰
DDNS
Select the DDNS (Dynamic DNS) server to use. One of the two servers can be selected.
z
True DNS:
TrueDNS service is used in this mode. Systems can be registered on the website
for TrueDNS service: http://ns1.truecam.net . System will get a domain name of xxx.truecam.net
style. Please, refer to user guide document for True DNS service.
z
DynDNS:
DynDNS service is used in this mode. Refer www.dyndns.org for details. ID,
Password and Domain name are needed when DynDNS is set.
Simple Network Management Protocol (SNMP)
is used in network management systems to
monitor network-attached devices for conditions that warrant administrative attention. It consists
of a set of standards for network management, including an application layer protocol, a
database schema, and a set of data objects
REMOTE CONFIGURATION
4. Network configuration
4 4