safety precaution HTP-T32G, Руководство пользователя

Страница: 33 / 55

H.264 IP Camera Manual
33/4
The HTP-T32G has one sensor port and one alarm port.
When a decoder system instead of a PC client is connected to a HTP-T32G, one system becomes a
Local system and the other a Remote system (Generally a system which is being used by the user is
called as Local system). Then, actions for events can be configured for events from the remote system
as well as for local system. For example, it is possible to turn on an alarm device in local (center)
decoder system when a sensor device in remote (site) IP camera is triggered.
Local
section configures
the actions for events from local (self) system, and configuration activates local devices and
Remote
sections configure the actions for events from remote (peer) system.
The following table lists the possible actions for events.
Action Description
Sensor In One sensor in port
Alarm out Triggers alarm (relay) port.
E-mail
Sends E-mail to the specified address. AVI
file can be attached
FTP Upload AVI file to a specified FTP server
‰
Local & Remote Event Configuration
z
The Sensor1 / Sensor2/ Sensor3 / Sensor4.
Configure the actions when the sensor is activated. Multiple actions can be set for a single
event.
z
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a single
event.
z
On Motion
Configure the actions when motion is detected. Multiple actions can be set for a single event.
z
On Disconnect
Configure the actions when the link (connection) with peer system is disconnected. Multiple
actions can be set for a single event.
REMOTE CONFIGURATION
6. Event Configuration
4