40
E
.Installing Rear-F
acing
41
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull on
the vehicle shoulder belt to
tighten.
It maybe easier to tighten the
vehicle belt through the belt
path opening as shown.
With a switchable retractor,
pull the vehicle shoulder
belt all the way out to
switch the retractor into the
ALR mode before tightening.
Feed the slack back into the
retractor while tightening.
8.
Note:
Review the section D-4 to determine what kind of
vehicle belts you have. Review your vehicle’s owner manual for
vehicle seat belt use.
Pull Latch Plate Across
to Opposite Side
Reach under pad and pull
the vehicle belt across
the plastic shell. Vehicle belt
MUST
be under pad and in
front of buckle strap.
Do not place vehicle belt
over child’s legs.
NOTE:
You must use the
1st or 2nd buckle strap
slots when rear-facing.
7.
1
2
Check Vehicle belt
Tightness
Grasp the child restraint
at the belt path with one
hand.
Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 1
inch.
NOTE:
If it moves more
than an 1 inch, try
reinstalling the child
restraint or try another
seating location.
Secure your child in the
child restraint.
9.
4358-5258 onSide Air 6/4/10 9:49 AM Page 43
Meijer.com