Check Harness Height
With child in the child
restraint, check the location
of the harness slot.
Follow the guidelines below
to determine the correct
harness height.
6.
Rear-Facing Position
Harness slot must be
even
with or just below
the
shoulders.
If the lowest harness slot is
above the child’s shoulders,
do not
use this child restraint.
Forward-Facing Position
Harness slot must be
even
with or just above
the
shoulders.
If the highest harness slot is
below the child’s shoulders,
do
not
use this child restraint.
Do not use this child restraint rear-
facing if the top of your child’s head
is above the top of the child
restraint.
Do not use this child restraint
forward-facing if the midpoint of your
child’s head is above the top of the
child restraint.
Make sure the harness height is correct for
your child’s size.
Failure to follow these steps can result in
serious injury or death.
16
17
C.
Basic U
se
To Change Harness
Location
With harness system loose,
from the back, remove
harness from the splitter
plate.
7.
From the front of child
restraint, pull harness
straps out.
a.
Rethread harness into new
harness slot location.
Make sure harness straps
do not twist.
b.
Fit loops on harness ends
completely on
the splitter
plate.
NOTE:
Make sure sewn
end of the harness strap
loop faces towards you.
c.
4358-5258 onSide Air 6/4/10 9:49 AM Page 19
Meijer.com