SAFETRACK ST.33, Руководство пользователя

Страница: 6 / 22

6
ADDITIONAL SPECIFIC SAFETY RULES FOR MAGNETIC DRILLING MACHINES
• Keep your fingers well out of the drill area;
• Avoid touching the drilled core that is automatically ejected by the centering pin when the working
procedure is finished. Contact with the core when it is hot, or if it falls, can cause personal injuries;
• Always use the clamp system. Before turning on machine ensure the clamp system is closed
securely.
•
Do not clamp the drilling machine on small or irregularly shaped objects;
• Always place the machine on a surface that is clear of shavings, chips, swarf and surface dirt;
• Do not turn on the machine until it has been mounted and installed according to these instructions;
• Do not turn on the machine before having checked that the clamp system stand has been tightened
firmly to the mounting surface;
• Adjust the table so cutter does not extend into the work piece before drilling. Do not perform any
design, assembly or construction activities on the work piece while the machine is turned on;
• Before turning on the machine, make sure the accessory has been mounted correctly;
• Do not use the machine on the same work piece on which electric welders are being used;
• Use only an appropriate cutting fluid. Use a general non-oil-based metal cutting coolant diluted
with water;
• Do not use liquid cutting fluids while drilling vertically or overhead. Dip the cutter in cutting paste
or apply an appropriate spray for these applications;
• Do not pour cutting fluid into the reservoir while it is mounted in the bracket. Do not allow cutting
fluid to enter the drill motor;
• Ensure that metal chips or resinous residue cannot lead to blockage of the function;
• In case of jammed cutter disconnect battery from the machine, remove the reason for the jam
before turning on the machine again.
RESIDUAL RISKS
In spite of the application of the relevant safety regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
•
Impairment of hearing
•
Risk of personal injury from flying particles
•
Risk of burns due to accessories becoming hot during operation
•
Risk of personal injury due to prolonged use.