SAFETRACK ST.33, Руководство пользователя

Страница: 15 / 22

15
TROUBLE SHOOTING.
Motor do not function - Battery is low
- Battery too hot
- Damaged or defective wiring
- Defective main power switch
- Defective Control Unit
Main power on, the motor does
not work - Damaged or defective wiring
- Defective On / Off switch
- Defective Control Unit
- Defective armature and/or field
Annular cutters break quickly,
holes are bigger than the hole
cutter - Clearance in the guide
- Bent spindle
- Shaft extending from the motor is bent
- Bent pilot pin
Motor running roughly and/or
seizing up - Bent spindle
- Shaft extending from the motor is bent
- Triangular guide not mounted straight
- Dirt between spindle and triangular guide
Motor starts running when
magnet switch is turned on - Damage or defective relays in control unit
Motor making a rattling sound - Gear ring (bottom of the armature) worn out
- Gear(s) worn out
- No grease in gear box
Motor humming, big sparks and
motor has no force - Armature damaged (burned)
- Field burned
Motor does not start or fails. - Damaged or defective wiring
- Dirt in sensor Speed Control Unit
- Damaged or defective (sensor) Speed Control Unit
- Damage to Armature or field coil
Guiding takes a great deal of
effort - Guide is set too tight
- Guide is dry, needs to be greased
- Guide/gear- rack/rotation system dirty or damaged
Frame is electrified - Damaged / defective wiring
- Motor seriously dirty
Fuse blows when main power
switch is turned on - Damaged or defective wiring
- Wrong value fuse
- Defective main power switch
- Defective Control Unit
Fuse blows when motor is started - Damaged or defective wiring
- Wrong value fuse
- Motor running roughly
- Defective Armature and / or Field
- Defective Control Unit
Rotation system free stroke too
long - Loose or defective gear-rack
- Defective rotation system
NOTE: Please contact Safetrack if there is machine failure and the problem cannot be corrected with one
of the above solutions!!