SAFETRACK ST.33, Руководство пользователя

Страница: 5 / 22

5
MACHINE USE AND CARE
1. Make sure that all parts on the drilling machine is fasten properly.
2. During machine operations, the annular cutter must be cooled and lubricated with good quality
cutting or lubrication oil. Remove the slug from the annular cutter after each hole. Caution, the slug
may be hot!
3. Use the clamp system to secure the drilling machine to the rail, set the correct clamp force with the
tow bolts on the front of the clamp system.
4. Do not use machine if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired. For electrical failures always send the machine to
Safetrack or authorized dealers for repair.
5. Disconnect the battery from the machine before making any adjustments, changing accessories, or
storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
6. Store idle drilling machines out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
7. Maintain machines with care. Keep cutting tools sharp and clean. Properly maintained tools, with
sharp cutting edges are less likely to bind and are easier to control.
8. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the machine operation. If damaged, have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
9. Use only accessories that are recommended by Safetrack for your model. Accessories that may be
suitable for one machine, may become hazardous when used on another machine.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of electric shock or injury.
3. When using this machine, you MUST wear ear and eye protection.