More info, articles, tutorials and videos at:
support.safescan.com
More info, articles, tutorials and videos at:
support.safescan.com
40
41
English
English
Adjusting the feeding gap
When counting errors such as double notes, chained or slant notes
occur frequently, or when banknotes are not being fed smoothly
through the machine, it may be necessary to adjust the hopper
adjusting knob. In the factory, the position of the hopper adjusting
knob is set optimal. However, due to the nature of some banknotes,
an adjustment may be required to ensure optimal feeding.
- When the banknotes are not being counted smoothly: increase
the note thickness distance by turning the adjusting knob clock-
wise (+).
- When counting errors such as ‘double notes’ or ‘chained notes/
double notes’ occur often, decrease the note thickness distance
by turning the adjusting knob anti-clockwise (-).
ATTENTION!
Make only minor
changes at once.
Make changes per
dot or half a dot.
+
+
Included
Safescan
MCS
software
cable
PC (Windows
operating system)
with MCS
installed
Use in combination with safescan money counting
software
The Safescan 2985-SX series can be used in combination with the
Safescan Money Counting Software.
Visit:
www.safescan.com/downloads
. This enables you to export
your counting results and serial number information to the PC for
further processing.
