SafeNet Sentinel, Руководство разработчика

Страница: 155 / 282

About Remote Update Actions
Sentinel Hardware Keys Developer’s Guide 137
3. Click Add . The Add action for features dialog box appears.
4. Under Features and Commands , select the check box shown beside
the feature for which commands are to be added. The applicable com-
mands appear in the right-side panel (under
Commands Options ).
The top-most command in the Command drop-down list is automat-
ically selected. If desired, you can remove it using the Remove
Command button. The table below shows you the possible com-
mands that can be added for each feature type:
Feature and License Action Type
Command Description Applies to
Update value Updates the existing feature value. ❑
String
❑
Raw Data
❑
Integer
❑
Boolean
Change write
password Changes the existing Write Password.
❑
String
❑
Raw Data
❑
Integer
❑
Boolean
Increment
counter Increments the existing Counter feature value
by the amount you specify. Counter
Overwrite
counter Replaces the existing Counter feature value
with the value you specify. Counter
Activate AES
feature Enables a disabled AES algorithm. AES
Deactivate AES
feature Disables an enabled AES algorithm. AES
Modify AES secret
key Replaces the existing secret key with the value
you specify. AES
Overwrite
execution count Replaces the existing execution count value
with the value you specify. ❑
AES
❑
ECC
Increment
execution count Increments the existing Counter feature value
by the amount you specify.
❑
AES
❑
ECC