44 INSTALLING NETWORK HASP
HASP Keys
Installation and Configuration Guide
The steps above will trigger the
Sentinel LDK License Manager
service restart, which may take a few
minutes.
You can also restart the service manually using native Windows features.
Figure 52: Access configuration
Once the service has restarted, open the
Sentinel Keys
tab and make sure the network key in question is in
the list.
To enable consistent aggressive search through the network, create a file named
hasp_71511.ini
with the
following content:
[NETWORK]
broadcastsearch = 0
serveraddr = x.x.x.x
disable_IPv6 = 0
Where
х.х.х.х
stands for the network key server IP address.
For the
serveraddr
parameter, you must specify the IP address of the network key server.
Specifying DNS name is not recommended at all times.
Move this file to each client PC, as well as to the network key server, and place it in the relevant directory (to
select the correct directory, see the table below).
Then restart the protected application or service.
