![background image](http://html2.mh-extra.com/html/safeline/sl1/sl1_installation-manual_3312755014.webp)
14
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
ENGLISH v2.01
Programming
diSTreSS meSSaGe
code
daTa
commenTS
Record distress message played
in the lift car.
*51*
”Speak” #
This message will be played in the lift cabin when the emergency lift
telephone starts calling the alarm centre. Make sure that there is no noice
in the background when recording the message.
example of message:
Please do not panic, the emergency telephone is
now calling the emergency call centre.
Record alarm message from Lift
Car to alarm central
*52*
”Speak” #
This message will be played to the alarm receiver and in the car when
the call is answered. Make sure that there is no noice in the background
when recording the message. Recording will be done with the internal
microphone of the SL2.
example of message:
This is an alarm from the lift on 5th avenue.
To hear the this message again, press “1”. To terminate the call, press “#”
before hanging up.
Options for the recorded distress
message
*61*
- #
0 = Disable recorded message.
1 = Enables recorded message.
*61*
#
Play the the recorded message.
Options for the recorded message
from lift car
*62*
- #
0 = Disable recorded message.
1 = Enables recorded message.
*62*
#
Play the the recorded message.
oTher codeS
code
daTa
commenTS
Emergency signal in speaker
*71*
- #
The speaker siren will sound at emergency call.
1 = On
0 = Off (Default)
Ring tone timeout
*72*
- - #
Number of ring signals before dialling the next number. (8 by default)
Additional input function
*73*
- #
Selects input function:
0 = None (Default)
1 = Filter, blocks the alarm input when active.
2 = LMS (Lift Monitoring System), sends a lift monitoring alarm at input
activation.
3 = Clear/Maintenance
Additional input type
*74*
- #
0 = Normally-open contact, NO (Default)
1 = Normally-closed contact, NC
Hot Line
*75*
- #
Phone connects directly to a fi xed receipient without dialling a phone
number
0 = Standard phone line (Default)
1 = Hotline
Compatability mode
*77*
- #
0 = Automatic voice switching
The call is validated when there is a voice response. The call is terminated
by pressing ”#”.
1= Kone ECII (lift telephone)
When there is a voice response, some ascending tones will be heard. The
call is validated by pressing ”4”. The call is terminated by pressing ”0”. The
call is terminated without reciept notifi cation by pressing ”2”(the unit will
call the next number).
2 = Manual voice switching
When there is a voice response, some ascending tones will be heard. The
call is validated by pressing ”4”. Unit is still in automatic mode. To enter
manual mode and talk press ”
*
”. To listen press ”7”. Go back to automatic
mode press ”4”. The call is terminated by pressing ”#”.
It is possible to enter manual voice switching mode although the unit is
programmed as automatic by pressing ”
*
”. No ascending tones will be
heard.