12
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
ENGLISH v2.01
Programming
Note! Please refer to the full confi guration setup in the “Confi gurations codes table” as these are merely
exmples.
example 1. Storing of two different telephone numbers, both to be answered as voice calls.
For test facility, see example 2.
If at any time you need to start over, use the factory reset command *99*1#
example 2. Slcc and 3 day test. (Slcc – Safeline call centre)
If at any time you need to start over, use the factory reset command *99*1#
confiGuraTion eXamPleS - Safeline auTodialer uniTS
Lift ID code (each lift must have its own unique code)
1. Start confi guration:
2. 1
st
phone number :
3. 2
nd
phone number :
4. Call type 1
st
number :
5. Call type 2
st
number :
6. Alarm button delay:
7. End confi guration:
- Shown set for 3 seconds
(olny if using SLCC)
- Shown set for 3 days
(For P100 use telephone number of SLCC, for Caller ID
set *31*4# and telephone number of GSM modem)
Enter P100 ID code:
2.
7. End confi guration:
6. Test alarm:
5. LMS phone number:
4.
Set number ogf days between
test alarm:
3. Set test alarm type:
1. Start confi guration: